WHY DO YOU NEED A SERVICE?

What does service include and what is it for? How often should it be done? These are the most common questions. Service maintenance is checking the operation of devices, cleaning, lubricating, replacing consumables, identifying faults at the initial stage and eliminating them. It is advisable to subject any modern household appliances to the service procedure at least once a year, but, depending on the operating conditions, this period may be even shorter. For example, with increased water hardness, water heating devices - boilers, water heaters and boilers, it is advisable to check twice a year, and in case of severe pollution or high air humidity, air conditioners should have the same period between maintenance.
Some types of service must be carried out by service providers, for example, employees of the gas supplier must check the operation of the gas equipment. However, “official” checks alone are not enough - firstly, they should be carried out approximately every three years, and secondly, these checks do not include a number of mandatory procedures, for example, descaling water heaters, flushing, minor repairs and fine tuning. For all this, you need to contact the specialists of the service centers.
Service maintenance of air conditioners includes diagnostics, cleaning, lubrication, flushing of internal and external panels, refueling and troubleshooting. It is necessary to carry out service at least once a year - the filters of air conditioners capture all dust, dirt, as well as various suspensions in the air. When you turn on the air conditioner with clogged filters, all this dirt will be blown into the air.
It is advisable to service the water treatment and water treatment systems in our region at least once every six months - due to the increased hardness of the water, the filters must be changed more often than indicated in the operating instructions. Some of the work can be done independently, for example, most modern household water treatment systems allow replacing filters or refueling consumables in just a few movements, however, only a master should clean and diagnose the equipment.
Thus, service maintenance is prevention and minor repairs of various types of equipment. Some of these works are carried out by the selling company, some can be done independently, and some must be entrusted to the master of the service center. High-quality and timely prevention can significantly increase the life of the device and avoid serious breakdowns.

Write a review

Note: HTML is not translated!
    Bad           Good